Description

SHIP FROM ARIZONA USA, FREE 2days PRIORITY MAIL SHIPPING FOR USA CUSTOMER.

Chargery C10325 is a high voltage battery charger, fully programmable battery type, cell count, charge current. Compatible with Li-Ion, Li-Poly, LIFE (LifePO4), Lito, Nimh/NICD and Lead Acid. Charger is optimized to be efficient, use no more than 1watt at idle mode. TFT color LCD display to show battery voltage and charged AH. One button design easy to operate.

Features
The Battery Charger has been designed to provide reliable, quality charging for battery systems in
electric drive vehicles. It is a high efficiency wide input voltage charger, the charger can output 1500W at
AC90V~265V in a smaller size. Many creative technology help to realize up to 94% of efficiency, and the
internal temperature is still under 50℃. The following are some new features:

– Intelligent control output voltage and current by microprocessor, 100% calibration before
delivery
– ±1% voltage and current accuracy
– Active PFC: smaller AC input current less interference, and Conform to European Commission
Regulation no 278/2009 and Energy Star Version 2.0
– AC 90-265V worldwide operation: need not any alternative switcher, worldwide safe operation.
– Low power consumption (less than 1W) at idle mode and standby mode
– Up to 94% of convert efficiency.
– Programmable output voltage from 10V to 102V
– Programmable output current from 1A to 25A
– TFT color LCD display output Voltage, current, power and internal temperature on time.
– Over current, over voltage, over load, over temperature, and short circuit protection
– Short-circuit protection on output, safer and more reliable.
– 2 Intelligent cooling fans turned on and adjust speed upon the temperature automatically
– ZVS/ZCS and Synchronous Rectification
assure the highest efficiency.
– High power density: 652W/Kg
– Start at no load or full load
– Approved by CE
– 24 months warranty
Application
– Home application
– Electric drive vehicles
Power output:
25amps, 1500watts max

Mechanical Characteristics
– Size：275*170*68 (L*W*H, mm) or 10.8 * 6.7 * 2.7 (L*W*H, inch)
– Weight: 2.46Kg without input cable
– Input power cable: AWG14 wire, 1.5m length
– Output DC connector: XT90
– AC input 110v-240volts
What’s included:
Chargery 1500watts Charger w/ XT90 male charging plug installed
Com cable
XT90 Female

Chargery BMS24-T is a special designed for Lipo-Life battery pack ideal for energy storage application and electric vehicle including E-motorcycle, E-Scooter, Golf Cart ect. The unit can measure or detect battery voltage, cells voltage, charge and discharge current, battery temperature and SOC (state of charge), independent display with TFT color LCD.
– BMS function can be set to (Balance only during charging, Balance During Discharging or Balance all the time)
– BMS can be power by battery pack from 8cells up (power draw from all cells) or by external power supply (15v-60v)
– Alarm and trigger can be set within BMS to control relay to shut off overcharge or over discharge or imbalance in cells.
– BMS can communicate with Chargery charger such as model C10325 (available on my other listing, sold separately)
Special Features
1. The BMS24T uses advanced ADC measurement technology, high accuracy, high voltage and high current detection circuit. The maximum voltage measurements tolerance is within 5mV at up to 24S LiPo battery
(102V)
2. Support regenerative braking, during braking operation can charge the batter pack and the discharge power
(Wh) will decrease to response to the braking power.
3. Charge/discharge current up to 600A. Bigger current can be customized.
4. 1.2A per cell balance current is very useful for large capacity battery pack, the feature can resume all cell voltage balance status at the shortest time. Over temperature protection make sure the system safety during balance.
5. BMS24T calculate and display the charge and discharge power (Wh), generally the battery rated power is rated voltage multiply rated battery capacity.
6. TFT LCD screen provides rich information including current, voltage, power, capacity, battery status, SOC and temperature and so on.
7. BMS24T features a maximal safety protection, within the range parameters can be setup, BMS24T will alarm and cutoff charge or discharge according to users’ setup, out of range of parameters, and trigged absolute maximum ratings BMS24T will force to cutoff charge or discharge to prevent the battery from fire.
8. Minimize the power consumption by draw current from all cells or external power supply.
9. Dual power design, the unit can be powered by all cells or external power supply.
10. Detect cell count at any time, and compare with the count detected when switch on first time. If it is not
Uniformity, the device will alarm and cutoff charge or discharge according to users’ setup, the feature can prevent any cell connection from losing.
11. Sound alarm and LED alarm will be triggered when any warning events happened, and then wait several seconds cut off or Don’t cut off charge or discharge. The delay time can be programmed.
12. Charge relay and discharge relay are controlled independently.
13. Two temperature sensors monitor battery temperature on different position.
14. Supports upgrading the firmware program by USB port.
15. BMS24T provide users the maximal flexibility, key parameters can be programmed.
16. BMS24T display battery SOC or called battery gauge similar with car dashboard. Cell count, battery pack voltage and battery gauge (%) is displayed simultaneously.
17. In case that the battery pack need not be charged and discharged, Press STOP button enter into sleep mode to save energy consumption, at this mode, Charge and Discharge is forbidden, and LCD back light is off.
Press any key to resume normal work mode.
18. LCD back light ON time can be programmed to save energy, when it is OFF, press any key to resume “ON”.

Protection functions
1. Cell count error protection
2. Over charge protection
3. Under voltage protection
4. Over current protection when charge or discharge
5. Over temperature protection
6. Over differential cell voltage protection
7. Over differential battery temperature protection
8. Under SOC protection

What’s included:
BMS-24T
TFT LCD DISPLAY
Beeper 32×13.5mm, 300mm
Warning LED, 300mm
Temperature Sensor, 600mm
Relay Controller wire 600mm
Current Sensor wire, 300mm
Battery Connector XHR-9pin 600mm
USB Data Cable
Communication cable for COM2
300Amps Heavy Duty Shunt 125x27x27mm

Please download and read over the manual first to see if this fit your need, it’s fully your reponsible to READ over the manual first to see if this can work for you before making your purchaSE. Go to manufacture main website to download Chargery.com
Chevy Volt Battery Module, Lithium Charger available on my other listing.
https://www.ebay.com/sch/azlithium/m.html?_nkw=&_armrs=1&_ipg=&_from=